This is the ultimate LCG kit on the market for the B6. It features a 8mm transmission raise, repositioned LCG motor mount, ability to flip shocks upside down, and ability to run 112t spur gear. 
 
Drop Down Motor Plate: Made of 4mm carbon fiber and dropped to the chassis floor. This motor plate also has longer slots to fit large spurs up to 112t. For 13.5 racing you will need to go bigger on both pinion and spur to make up the larger gap.
 
Low Profile Shock Tower: Made of 4mm carbon fiber and lowered to keep the shocks from lifting with the transmission. This is the best balance of shock position and shock height. I recommend using stock rear shocks with limiters but you can also use front shocks with limiters and even super short shocks. There are 34 different shock positions and room to clear wide wheels.
 
Transmission Riser & Spacers: These are 3D printed with solid walls around each thru hole and printed in an industrial grade high strength carbon infused material. Each piece gets sanded to remove burrs and insure proper flatness. These are not like the typical cheapo 3D printed parts on the market.