This is the ultimate LCG kit on the market for the Losi 22. It features a 8mm transmission raise, low profile shock tower, repositioned motor plate with ability to run up to a 108t spur gear, and all hardware included!
 
Drop Down Motor Plate: Made of 4mm carbon fiber and dropped to the chassis floor. This motor plate also has longer slots to fit large spurs up to 108t. There is a recessed section for using slipper eliminators without shims/washers. For 13.5 racing you will need to go bigger on both pinion and spur to make up the larger gap. 
 
Low Profile Shock Tower: Made of 4mm carbon fiber and lowered to keep the shocks from lifting with the transmission. This is the best balance of shock position and shock height. Rear buggy shocks, front buggy shocks, or similar will work with correct limiting. For 5.0 style applications, shocks can be flipped upside down for increased LCG.
 
Transmission Riser: 8mm rise. These are 3D printed with solid walls around each thru hole and printed in a high strength carbon infused material. Each piece gets inspected and deburred if necessary to insure proper flatness and quality. These are not like the typical cheapo 3D printed parts on the market.
 
Waterfall: May be used with included hardware. If you are using tall gears there may not be room for the waterfall to mount and must be removed.